Click Here for 2nd gen Ford 2.3 Instructions On-line


2.3 Ford into '86-'91 RX-7 Conversion Parts

...New Radiator for 2nd gen / Ford Conversion...
We now have available a "double pass" radiator that has both the inlet and outlet on the driver's side, possibly eliminating the need for special plumbing, depending on your accessory drive and layout.

More to come....


FORD 2.3 into MAZDA RX-7 2nd gen. '86-'91

BASIC KITS...Just what you need to get your 2.3 4cyl engine & transmission into place.
Easy bolt-in installation. Minor welding required.
Just choose one below that fits your requirements...
Basic Kit Only- Includes...
Instructions
Chassis Bracket Set
Rubber engine mount set
transmission crossmember (choice of C4/AOD/T5)
free shifter extension for T5 applications........265.00


BASIC KIT + DRIVESHAFT
Special package price.............................565.00

BASIC KIT PLUS- 2nd gen Ford
Includes...
Basic kit, rubber engine & transmission mounts
Driveshaft, Temp sender adapter bushing.
Special package deal pricing......................595.00




Individual Parts Available...
These parts are available individually to custom compliment your Basic Kit... ]

ALUMINUM RADIATOR KIT,
22x19x3,equal to 5 row copper/brass, good for 480 HP.
Brackets have a unique design that seals the area
around the radiator to the existing sheetmetal,
ensuring proper airflow thru the radiator core.

Rad and brackets only / traditional Ford outlets....575.00

Rad and brackets only / Double pass core
both outlets on driver's side.......................595.00


AC CONDENSOR BRACKET SET
relocates the stock RX-7 condensor ahead of the
round crossmember, uses the stock condensor mounting
points and drier plumbing............................60.00


CLUTCH MASTER CYLINDER
1" bore for use with pull style slave................90.00


PULL STYLE CLUTCH SLAVE CYLINDER Anodized aluminum
body, rod-end style anchor...........................75.00


SHIFTER EXTENSION BRACKET
Re-locates the T-5 shifter 3" rearward...............20.00


DRIVESHAFT Custom Balanced Shaft with u-joints
(does not include transmission output slip yoke)
Specify transmission and companion flange type
Steel(new components)...............................335.00
Aluminum (new components)...........................455.00
Rear Flange only- '86-'91 NA models..................75.00
Rear Flange only- '87-'91 Turbo II models............75.00
Slip Yoke- 1-1/2"x28 spline..........................80.00


TRANSMISSION COOLER attaches to radiator core,
5"x14"x3/4" 4 pass...................................45.00


'86-'91 RX-7 SOLID AXLE / TORQUE ARM "TASA" REAR SUSPENSION UPGRADES

DIY KIT FORM
Ford 8.8 / Torque Arm / Solid Axle Conversion "KIT FORM"
'86-'91 RX-7 TA/SA 8.8 Basic Kit (brackets only) includes...
Torque arm assembly (Mustang or Explorer 8.8)
Torque arm rear anchor plate
(5) grade 8 rear cover flange bolts
Torque arm front yoke / driveline loop assembly
(2) rubber chassis isolator bushing sets
(4) Delrin T/A nose bushings
(2) lower link front bracket assemblies
(4) lower link front bracket back-up plates w/ (16) bolts/nuts
(2) lower link rear bracket sets (weld-on)
(2) lower shock adapter bushings
watts linkage center pivot assembly (weld-on)
watts linkage upper/left chassis bracket
watts linkage lower/right chassis bracket
Watts link adjustment sleeves.........................1235.00


BOLT-IN DELUXE PACKAGE
'86-'91 RX-7 TA/SA 8.8 Bolt-in Package...
...Complete 8.8 rear, assembled w/ brackets attached
...Torque arm assembly
...Torque arm rear anchor plate
...Chrome rear housing cover (numerically lower ratios only)
...(8) grade 8 rear cover flange bolts
...Torque arm front yoke / driveline loop assembly
...(2) rubber chassis isolator bushing sets
...(4) Delrin T/A nose bushings
...(2) lower link front bracket assemblies
...(4) lower link front bracket back-up plates w/ (16) bolts/nuts
...(2) lower link rear bracket sets (installed)
...(2) lower shock adapter bushings
...(2) RX-7 caliper brackets (installed)
...watts linkage center pivot assembly (installed)
...watts linkage upper/left chassis bracket
...watts linkage lower/right chassis bracket
...choice of gear ratio and housing width
...New billet 9" style housing ends- NO MORE C-CLIPS!!!
...New 31 spline TrackLok differential standard
...new forged 31 spline 5 lug 9" style axles w/ studs
...new bearings / seals
............................Deluxe package price...$3235.


"UPGRADED" DELUXE PACKAGE
'86-'91 RX-7 TA/SA 8.8 Deluxe "Upgraded" Package...
..."Upgraded" package additions include...
All items listed above in the Bolt-In Deluxe Package, with the addition of the following option parts, and a money saving package price.
Additions include
Extreme Duty rod end style adjustable 1-1/4" lower links
Fabricated watts linkage w/ rod end style links
Deluxe "Upgraded" package price......$3865.00
Detroit Locker diff option.........add 270.00
Tru-Trac Torsen diff option........add 170.00
Competition only Spool option-no extra charge


Available TASA options include...
Extreme Duty rod end style adjustable lower links
Large 1-1/4"x.095" tubing, threaded RH/LH inserts
includes (4) Kevlar lined rod ends & jam nuts
direct replacements for 1st gen RX-7 lower links.......195.00/pr
Fabricated watts linkage w/ rod end style links and
Delrin pivot bushings, Kevlar lined rod ends...........350.00
RX-7 caliper mounting bracket set.......................65.00

SPECIAL NOTE-...Our TA/SA Basic Kit and Deluxe package also requires a few additional parts
that can typically be obtained locally, potentially trimming
quite a bit of money from your conversion. Those parts are...
(1) '79-'85 RX-7 complete watts linkage set
(2) '79-'85 RX-7 rear suspension lower links & pivot bolts
These additional parts are NOT required for the "UPGRADED" Deluxe Package.