Click Here for '86-'88 (S4) RX-7 / LS1 specific Installation Instructions On-line

Click Here for '89-'91 (S5) RX-7 / LS1 specific Installation Instructions On-line


CHEVY LSX V8 into '86-'91 MAZDA RX-7
Parts, Prices & Infomation

BASIC KIT...Just what you need to get your LSX engine & transmission into place.
Easy bolt-in installation. No cutting or welding required.
Just choose one below that fits your requirements...
Basic Kit Only- Includes...
Basic Kit w/ rubber mounts & LSX engine adapter plates
LSX Cradle for RX-7 w/manual steering rack..........515.00
LSX PS Cradle for RX-7 w/power steering rack. Engine
raised 3/8" to clear RX-7 power steering rack.......525.00


LSX BASIC KIT w/ DRIVESHAFT
Special package deal pricing
w/o power steering..................................825.00
w/ power steering...................................835.00


BASIC KIT PLUS
Includes...
LSX Basic kit, rubber engine & transmission mounts,
Driveshaft, LSX Temp sender adapter bushing, and
Sway bar spacer set. Special package deal pricing
(driveshaft included, but not shown in picture)
w/o power steering..................................865.00
w/ power steering...................................875.00



Deluxe Kits...
Deluxe package pricing to save both time and money.
Just choose a Deluxe Kit below that fits your requirements...


DELUXE KIT (w/o AC or power steering)
includes...
LSX Engine Cradle and Spuds
Engine & Transmission rubber mounts
Transmission Bracket of your choice
Aluminum Radiator & Bracket Set
LSX Temp. Sender Adapter Bushing
Sway Bar Spacer set
New Driveshaft w/ slip yoke........................1540.00
...............power steering version..............1555.00




Individual Parts Available...
These parts are available individually to custom compliment your Basic Kit...
ALUMINUM RADIATOR KIT bolt-in
22x19x3,equal to 5 row copper/brass,good for 480 HP
Brackets have a unique design that seals the area
around the radiator to the existing sheetmetal,
ensuring proper airflow thru the radiator core.
LSX Radiator with Brackets..........................615.00


DRIVESHAFT Custom Balanced Shaft with u-joints
(does not include transmission output slip yoke)
Specify transmission and companion flange type
Steel(new components)...............................335.00
Aluminum (new components)...........................455.00
Rear Flange only- '86-'91 NA models..................75.00
Rear Flange only- '87-'91 Turbo II models............75.00
Slip Yoke- 1-1/2"x27 spline (T-350/2004R/T5/T56).....80.00
Slip Yoke- 1-7/8"x32 spline (T-400).................105.00


RUBBER MOUNT SET:Includes...
(2) rubber engine mounts
(1) rubber transmission mount........................45.00/ set


SOLID MOTOR MOUNT SET:
All steel mounts to replace the factory style rubber
mounts (for competition applications)...............$70.00/pair


LSX TEMP. SENDER ADAPTER BUSHING adapts stock Mazda
temp. guage and sender to Chevy.......................12.00



CLUTCH MASTER CYLINDER
7/8" bore (for stock "everyday driver" feel).........90.00
1" bore (for quicker/stiffer "racecar" feel).........90.00


SWAY BAR SPACER KIT (2) Aluminum Spacers w/ Bolts,
needed for V-8 swaps only............................40.00


AC CONDENSOR BRACKET SET
relocates the stock RX-7 condensor ahead of the
round crossmember, using the stock condensor mounting
points and drier plumbing............................60.00


LSX Engine Cradle Only
w/o power steering..................................315.00
w/ power steering...................................325.00
Cradle Installation Hardware Only....................55.00
LSX plate set........................................65.00
Transmission Crossmember Only (specify trans type)...55.00


'86-'91 RX-7 SOLID AXLE / TORQUE ARM "TASA" REAR SUSPENSION UPGRADES

DIY KIT FORM
Ford 8.8 / Torque Arm / Solid Axle Conversion "KIT FORM"
'86-'91 RX-7 TA/SA 8.8 Basic Kit (brackets only) includes...
Torque arm assembly (Mustang or Explorer 8.8)
Torque arm rear anchor plate
(5) grade 8 rear cover flange bolts
Torque arm front yoke / driveline loop assembly
(2) rubber chassis isolator bushing sets
(4) Delrin T/A nose bushings
(2) lower link front bracket assemblies
(4) lower link front bracket back-up plates w/ (16) bolts/nuts
(2) lower link rear bracket sets (weld-on)
(2) lower shock adapter bushings
watts linkage center pivot assembly (weld-on)
watts linkage upper/left chassis bracket
watts linkage lower/right chassis bracket
Watts link adjustment sleeves.........................1235.00


BOLT-IN DELUXE PACKAGE
'86-'91 RX-7 TA/SA 8.8 Bolt-in Package...
...Complete 8.8 rear, assembled w/ brackets attached
...Torque arm assembly
...Torque arm rear anchor plate
...Chrome rear housing cover (numerically lower ratios only)
...(8) grade 8 rear cover flange bolts
...Torque arm front yoke / driveline loop assembly
...(2) rubber chassis isolator bushing sets
...(4) Delrin T/A nose bushings
...(2) lower link front bracket assemblies
...(4) lower link front bracket back-up plates w/ (16) bolts/nuts
...(2) lower link rear bracket sets (installed)
...(2) lower shock adapter bushings
...(2) RX-7 caliper brackets (installed)
...watts linkage center pivot assembly (installed)
...watts linkage upper/left chassis bracket
...watts linkage lower/right chassis bracket
...choice of gear ratio and housing width
...New billet 9" style housing ends- NO MORE C-CLIPS!!!
...New 31 spline TrackLok differential standard
...new forged 31 spline 5 lug 9" style axles w/ studs
...new bearings / seals
............................Deluxe package price...$3235.


"UPGRADED" DELUXE PACKAGE
'86-'91 RX-7 TA/SA 8.8 Deluxe "Upgraded" Package...
..."Upgraded" package additions include...
All items listed above in the Bolt-In Deluxe Package, with the addition of the following option parts, and a money saving package price.
Additions include
Extreme Duty rod end style adjustable 1-1/4" lower links
Fabricated watts linkage w/ rod end style links
Deluxe "Upgraded" package price......$3865.00
Detroit Locker diff option.........add 270.00
Tru-Trac Torsen diff option........add 170.00
Competition only Spool option-no extra charge


Available TASA options include...
Extreme Duty rod end style adjustable lower links
Large 1-1/4"x.095" tubing, threaded RH/LH inserts
includes (4) Kevlar lined rod ends & jam nuts
direct replacements for 1st gen RX-7 lower links.......195.00/pr
Fabricated watts linkage w/ rod end style links and
Delrin pivot bushings, Kevlar lined rod ends...........350.00
RX-7 caliper mounting bracket set.......................55.00

SPECIAL NOTE-...Our TA/SA Basic Kit and Deluxe package also requires a few additional parts
that can typically be obtained locally, potentially trimming
quite a bit of money from your conversion. Those parts are...
(1) '79-'85 RX-7 complete watts linkage set
(2) '79-'85 RX-7 rear suspension lower links & pivot bolts
These additional parts are NOT required for the "UPGRADED" Deluxe Package.


...Click Here for Ordering Information...