Mopar A Engine into MAZDA RX-7 2nd gen. '86-'91

BASIC KIT includes:
Mopar 318/340/360 kit includes:
Engine Cradle and installation hardware
Crossmember Spuds and Instruction set
"A motor" engine adapter bracket set (not shown in pic)
Choice of transmission crossmember
rear sump oil pan required
Non-power steering version..........................485.00
Power steering version (extra clearance for lines)..495.00
Above Basic Kit w/ rubber mounts.................add 45.00

BASIC KIT + DRIVESHAFT
Special package price...........................add 325.00

ALUMINUM RADIATOR KIT,
22x19x3,equal to 5 row copper/brass, good for 480 HP.
Radiator and brackets only -........................575.00

TACHOMETER RE-CALIBRATION............................65.00 + return shipping

DRIVESHAFT Custom Balanced Shaft with u-joints
(does not include transmission output slip yoke)
Specify transmission and companion flange type
Steel(new components)...............................335.00
Aluminum (new components)...........................455.00
Rear Flange only- '86-'91 NA models..................75.00
Rear Flange only- '87-'91 Turbo II models............75.00
Slip Yoke............................................80.00

TRANSMISSION COOLER attaches to radiator core,
5"x14"x3/4" 4 pass...................................45.00

AC CONDENSOR BRACKET SET
relocates the stock RX-7 condensor ahead of the
round crossmember, using the stock condensor mounting
points and drier plumbing............................60.00

ENGINE ADAPTER BRACKETS ONLY
Use these brackets with an existing Chevy V-8 cradle
if you would like to change to Mopar "A" engine
Engine Adapter Bracket set..........................155.00
Engine Cradle Only
...w/o power steering...............................335.00
...w/ power steering................................345.00
Cradle Installation Hardware Only....................55.00
Transmission Crossmember Only (specify trans type)...55.00


'86-'91 RX-7 SOLID AXLE / TORQUE ARM "TASA" REAR SUSPENSION UPGRADES

DIY KIT FORM
Ford 8.8 / Torque Arm / Solid Axle Conversion "KIT FORM"
'86-'91 RX-7 TA/SA 8.8 Basic Kit (brackets only) includes...
Torque arm assembly (Mustang or Explorer 8.8)
Torque arm rear anchor plate
(5) grade 8 rear cover flange bolts
Torque arm front yoke / driveline loop assembly
(2) rubber chassis isolator bushing sets
(4) Delrin T/A nose bushings
(2) lower link front bracket assemblies
(4) lower link front bracket back-up plates w/ (16) bolts/nuts
(2) lower link rear bracket sets (weld-on)
(2) lower shock adapter bushings
watts linkage center pivot assembly (weld-on)
watts linkage upper/left chassis bracket
watts linkage lower/right chassis bracket
Watts link adjustment sleeves.........................1235.00


BOLT-IN DELUXE PACKAGE
'86-'91 RX-7 TA/SA 8.8 Bolt-in Package...
...Complete 8.8 rear, assembled w/ brackets attached
...Torque arm assembly
...Torque arm rear anchor plate
...Chrome rear housing cover (numerically lower ratios only)
...(8) grade 8 rear cover flange bolts
...Torque arm front yoke / driveline loop assembly
...(2) rubber chassis isolator bushing sets
...(4) Delrin T/A nose bushings
...(2) lower link front bracket assemblies
...(4) lower link front bracket back-up plates w/ (16) bolts/nuts
...(2) lower link rear bracket sets (installed)
...(2) lower shock adapter bushings
...(2) RX-7 caliper brackets (installed)
...watts linkage center pivot assembly (installed)
...watts linkage upper/left chassis bracket
...watts linkage lower/right chassis bracket
...choice of gear ratio and housing width
...New billet 9" style housing ends- NO MORE C-CLIPS!!!
...New 31 spline TrackLok differential standard
...new forged 31 spline 5 lug 9" style axles w/ studs
...new bearings / seals
............................Deluxe package price...$3235.


"UPGRADED" DELUXE PACKAGE
'86-'91 RX-7 TA/SA 8.8 Deluxe "Upgraded" Package...
..."Upgraded" package additions include...
All items listed above in the Bolt-In Deluxe Package, with the addition of the following option parts, and a money saving package price.
Additions include
Extreme Duty rod end style adjustable 1-1/4" lower links
Fabricated watts linkage w/ rod end style links
Deluxe "Upgraded" package price......$3865.00
Detroit Locker diff option.........add 270.00
Tru-Trac Torsen diff option........add 170.00
Competition only Spool option-no extra charge


Available TASA options include...
Extreme Duty rod end style adjustable lower links
Large 1-1/4"x.095" tubing, threaded RH/LH inserts
includes (4) Kevlar lined rod ends & jam nuts
direct replacements for 1st gen RX-7 lower links.......195.00/pr
Fabricated watts linkage w/ rod end style links and
Delrin pivot bushings, Kevlar lined rod ends...........350.00
RX-7 caliper mounting bracket set.......................65.00

SPECIAL NOTE-...Our TA/SA Basic Kit and Deluxe package also requires a few additional parts
that can typically be obtained locally, potentially trimming
quite a bit of money from your conversion. Those parts are...
(1) '79-'85 RX-7 complete watts linkage set
(2) '79-'85 RX-7 rear suspension lower links & pivot bolts
These additional parts are NOT required for the "UPGRADED" Deluxe Package.


...Click Here for Ordering Information...